CVE & CISA-KEV Catalog

MCO is vulnerable to Account Denial of Service due to improper implementation of password reset functionality. Each password reset request invalidates previously set password as well as previously issued temporary passwords, furthermore, password resets are not limited in any way. An attacker who provides victim's email and answer to their security question, can successfully initiate the reset process and continuously invalidate credentials, effectively locking the victim out of their account. Answering security questions has a limited number of tries which lowers the risk of this vulnerability. Because vendor contact attempts were unsuccessful, the vulnerability has only been confirmed in version 25.3.3.1 but may also affect other versions.

Published 2026-07-01

KTM System e-BOK does not implement any limit or timeout on consecutive login attempts, allowing an attacker to perform unlimited authentication requests. This lack of rate‑limiting enables efficient brute‑force attacks against user accounts. When combined with vulnerability CVE-2026-35097, where passwords are restricted to a six‑digit numeric format, this becomes a critical issue, as such passwords can be brute‑forced in a relatively short time. This issue was fixed in the patch published in June 2026.

Published 2026-06-30

An Improper Authorization vulnerability exists in PayloadCMS version 3.84.1 due to insufficient access control on the account unlock operation.

Published 2026-06-26

The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks or brute-force attacks to gain unauthorized access.

Published 2026-06-25

NocoDB is software for building databases as spreadsheets. Prior to 2026.04.1, sign-in response timing differed between known and unknown email addresses because the unknown-user branch returned without performing a password hash comparison. This vulnerability is fixed in 2026.04.1.

Published 2026-06-23

Capgo before 12.128.2 contains a credential validation vulnerability in the POST /functions/v1/private/validate_password_compliance endpoint that is callable using only the public Supabase key without authentication. The endpoint is CORS-permissive with wildcard origin allowance and lacks rate limiting, enabling attackers to perform password spraying and credential stuffing attacks to compromise user accounts.

Published 2026-06-23

AIL did not restrict repeated failed attempts to verify a two-factor authentication (OTP) code. An attacker who had reached the 2FA verification step, such as after successfully completing the password-authentication stage, could submit an unlimited number of OTP guesses. This could enable brute-force guessing of a valid code and bypass the intended second authentication factor, resulting in unauthorized account access. The patch introduces per-user failed-OTP tracking, blocks verification after 30 failed attempts for one hour, clears the counter after a successful OTP verification, and provides administrator recovery actions to purge affected lockouts.

Published 2026-06-22

Authelia is an open-source authentication and authorization server providing two-factor authentication and single sign-on (SSO) for applications via a web portal. In versions 4.38.0 through 4.39.19, when a user authenticates via Basic Auth (i.e via the `Authorization` header with the `Basic` scheme) on the authz verification endpoint, Authelia takes the username directly from the `Authorization` header and passes it as is to the regulation system for ban checking and attempt recording. LDAP treats usernames case insensitively : `john`, `John`, and `JOHN` all bind as the same user. But the regulation SQL queries treat the lookup of these values in certain scenarios as case sensitive. This allows each variation of a usernames case to have its own ban bucket. Upgrade to 4.39.20 to receive a p

Published 2026-06-19

Improper restriction of excessive authentication attempts vulnerability in Başbelen Group Food Cafe Businesses Industry and Trade Ltd. Co. Pause+ Mobile App allows Authentication Bypass. This issue affects Pause+ Mobile App: from v1.0.6 before v1.5.

Published 2026-06-12

A remote unauthenticated attacker may be able to conduct credential-guessing attacks against user accounts in Sonatype Nexus Repository via authentication endpoints.

Published 2026-06-11

FOSSBilling is a free, open-source billing and client management system. Prior to version 0.8.0, the password reset confirmation endpoint `/client/reset-password-confirm/:hash` is handled by a non-API controller and is not covered by FOSSBilling's rate limiter, which only applies to `/api/*` routes. This allows an attacker to probe the endpoint for valid reset tokens without any per-IP request limiting, attempt counting, or lockout mechanism. The endpoint acts as an oracle, returning a distinguishable response for valid versus invalid tokens (HTTP 200 vs HTTP 302 redirect). An attacker can submit unlimited token guesses to the password reset confirmation endpoint with no throttling applied. However, practical exploitability is significantly mitigated by the current token generation, which

Published 2026-06-04

Mercusys AC12G (EU) V1 with firmware AC12G(EU)_V1_200909 enables WPS 2.0 by default with a weak lockout policy (60-second lockout after 10 attempts).

Published 2026-06-03

Mercusys AC12G (EU) V1 router with firmware AC12G(EU)_V1_200909 allows unauthenticated brute-force attacks via the TDDP password change endpoint (code=10), which lacks the rate limiting applied to the login endpoint (code=7). An attacker on the adjacent network can attempt unlimited passwords without triggering account lockout.

Published 2026-06-03

A vulnerability was detected in unitedbyai droidclaw up to 0.5.3. The affected element is an unknown function of the file server/src/routes/pairing.ts of the component claim Endpoint. The manipulation results in improper restriction of excessive authentication attempts. The attack may be launched remotely. This attack is characterized by high complexity. The exploitability is described as difficult. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

Published 2026-06-01

Uncontrolled resource consumption in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with write access to the in-vehicle network to permanently immobilize the motorcycle. The WCM enforces a brute-force lockout on the immobilizer authentication algorithm, but the lockout counter is reachable by any unauthenticated message, has no session binding, and does not reset on power cycle. An attacker can deliberately trip the lockout with a small number of crafted frames, leaving the bike un-startable until dealer service. Specific thresholds have been withheld pending vendor remediation.

Published 2026-05-29

Better Auth is an authentication and authorization library for TypeScript. Prior to 1.4.17 and 1.5.0-beta.9, Better Auth's HTTP rate limiter keyed each request by the exact textual IP address it received in x-forwarded-for (or the configured IP-bearing header). IPv6 clients controlling a typical /64 allocation could rotate through 2^64 distinct source addresses without exhausting the per-address counter, defeating rate limiting on /sign-in/email, /sign-up/email, /forget-password, and every other path the limiter protects. The same bug allowed a single client to vary the textual encoding of one IPv6 address (uppercase, compression, IPv4-mapped, hex-encoded IPv4-in-IPv6) and produce multiple distinct keys. This vulnerability is fixed in 1.4.17 and 1.5.0-beta.9.

Published 2026-05-28

phpMyFAQ before 4.1.3 contains an authentication bypass vulnerability in the password reset endpoint that allows unauthenticated attackers to reset any user account password without token verification or email confirmation. Attackers can enumerate valid usernames, obtain plaintext passwords via email, and achieve complete account takeover including administrative access.

Published 2026-05-28

The Login with OTP plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.6. This is due to an incomplete fix for CVE-2024-11178: the rate-limit/lockout check added to `otpl_login_action()` was placed only inside the OTP-generation branch and is never evaluated on the OTP-validation branch, and the generated 6-digit OTP additionally has no expiration. This makes it possible for unauthenticated attackers to brute-force the 900,000-value OTP space for any user account (including administrators) and obtain a valid `wp_set_auth_cookie()` session, leading to full site compromise.

Published 2026-05-27

Improper restriction of excessive authentication attempts vulnerability in Turkiye Electricity Transmission Corporation (TEİAŞ) Mobile Application allows Brute Force. This issue affects Mobile Application: from 1.6.2 before 1.13.

Published 2026-05-21

iDS6 DSSPro Digital Signage System 6.2 contains a CAPTCHA security bypass vulnerability that allows attackers to bypass authentication by requesting the autoLoginVerifyCode object. Attackers can retrieve valid CAPTCHA codes via the login endpoint and use them to perform brute-force attacks against user accounts.

Published 2026-05-16

phpMyFAQ before 4.1.2 contains an improper restriction of excessive authentication attempts vulnerability in the /admin/check endpoint, which accepts arbitrary user-id parameters without session binding or rate limiting. Unauthenticated attackers can brute-force any user's six-digit TOTP code by submitting POST requests with sequential token values, bypassing two-factor authentication to gain full administrative access.

Published 2026-05-15

Strapi is an open source headless content management system. In Strapi versions prior to 5.45.0, the rate-limit middleware in the users-permissions plugin derived its rate-limit key in part from `ctx.request.body.email`, including on routes whose body schema does not contain an `email` field (`/auth/local`, `/auth/reset-password`, `/auth/change-password`). An unauthenticated attacker could include an arbitrary `email` value in the request body to obtain a fresh rate-limit key per request, effectively bypassing per-IP throttling on those routes and enabling high-volume credential brute-force, password-reset code brute-force, and credential-stuffing attempts. The rate-limit key was constructed as `${userIdentifier}:${requestPath}:${ctx.request.ip}`, where `userIdentifier = ctx.request.body.e

Published 2026-05-14

HCL AION is affected by a vulnerability where adequate protections against brute-force attempts are not enforced. This may allow repeated authentication attempts, potentially leading to unauthorized access or account compromise under certain conditions.

Published 2026-05-14

OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, a logic flaw in the OPNsense lockout_handler allows an unauthenticated attacker to continuously reset the authentication failure counter for their IP address. By interjecting a crafted username containing a success keyword ("Accepted" or "Successful login") between normal brute-force attempts, an attacker can prevent the failure counter from ever reaching the lockout threshold. This vulnerability is fixed in 26.1.7.

Published 2026-05-13

** UNSUPPORTED WHEN ASSIGNED ** An improper restriction of excessive authentication attempts vulnerability in the web management interface of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the LAN to brute-force the password and bypass authentication.

Published 2026-05-12

Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to 1.35.4, there is a security vulnerability in Vaultwarden that allows bypassing the login brute-force protection if email 2fa is enabled. If email 2fa is enabled, the unprotected 2fa-function send_email_login (email.rs, api endpoint /api/two-factor/send-email-login) also acts as an oracle determining whether a username-password combination is correct. An attacker can abuse that endpoint to brute-force passwords without rate-limiting. This works even for users who don't have email 2fa configured. This vulnerability is fixed in 1.35.4.

Published 2026-05-11

Improper restriction of excessive authentication attempts (CWE-307) in pgAdmin 4. pgAdmin enforces MAX_LOGIN_ATTEMPTS only inside its custom /authenticate/login view. Flask-Security's default /login view, which is registered automatically by security.init_app() and is reachable on every server, never consulted the User.locked field: pgAdmin's User model relied on Flask-Security's UserMixin.is_locked() (which always returns 'not locked') and Flask-Login's is_active (which only checks the active column, not locked). An attacker who triggered an account lockout via /authenticate/login could therefore obtain a session by re-submitting valid credentials directly to /login, defeating the brute-force-protection control for accounts using the INTERNAL authentication source. The same bypass also m

Published 2026-05-11

Signal K Server is a server application that runs on a central hub in a boat. Prior to version 2.25.0, the HTTP login endpoints (POST /login and POST /signalk/v1/auth/login) are protected by express-rate-limit (default: 100 attempts per 10-minute window, configurable via HTTP_RATE_LIMITS). The WebSocket login path — sending {login: {username, password}} messages over an established WebSocket connection — calls app.securityStrategy.login() directly without any rate limiting. An attacker can bypass HTTP rate limiting entirely by opening a WebSocket connection and attempting unlimited password guesses at the speed bcrypt allows (~20 attempts/sec with 10 salt rounds). This issue has been patched in version 2.25.0.

Published 2026-05-09

Improper restriction of excessive authentication attempts vulnerability in Hitachi Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28. This issue affects Hitachi Virtual Storage Platform G130, G150, G350, G370, G700, G900, F350, F370, F700, F900, Hitachi Virtual Storage Platform E390, E590, E790, E990, E1090, E390H, E590H, E790H, E1090H, Hitachi Virtual Storage Platform One Block 23, One Block 24, One Block 26, One Block 28 : before DKCMAIN Ver 88-08-16-xx/00, GUM Ver. 88-08-20/00, before DKCMAIN Ver 93-07-26-xx/00, GUM Ver. 93-07-26/00, before DKCMAIN Ver A3-04-02-xx/00, EMS

Published 2026-05-07

OpenEMR 7.0.1 contains an authentication brute force vulnerability that allows attackers to bypass rate limiting protections by sending repeated login attempts to the main login endpoint. Attackers can submit POST requests with authUser and clearPass parameters to systematically test username and password combinations without account lockout restrictions.

Published 2026-05-05

A vulnerability has been found in CodeWise Tornet Scooter Mobile App 4.75 on iOS/Android. The impacted element is an unknown function of the file /TwoFactor. Such manipulation leads to improper restriction of excessive authentication attempts. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is regarded as difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Published 2026-05-03

U-SPEED N300 router V1.0.0 does not implement rate limiting or account lockout protections on the /api/login endpoint. This allows an attacker on the local network to perform unlimited authentication attempts, enabling brute-force attacks against the administrator account and potential unauthorized access to the router management interface.

Published 2026-04-30

Wazuh is a free and open source platform used for threat prevention, detection, and response. From version 4.0.0 to before version 4.14.4, Wazuh's server API brute-force protection for POST /security/user/authenticate can be bypassed by sending concurrent authentication requests. Although the configured threshold (max_login_attempts, default 50) is enforced correctly for sequential requests, a parallel burst allows significantly more failed login attempts to be processed before the IP block is applied. This enables an attacker to perform more password guesses than the configured policy intends (e.g., 100 attempts processed where 50 should be allowed). This issue has been patched in version 4.14.4.

Published 2026-04-29

The RTSP service of MERCURY IP camera MIPC252W 1.0.5 Build 230306 has an issue handling failed Digest authentication attempts. By repeatedly sending RTSP requests with invalid authentication parameters, an unauthenticated attacker can cause the RTSP service to enter a persistent authentication failure state, preventing legitimate clients from authenticating and leading to a denial of service.

Published 2026-04-27

DWM-222W USB Wi-Fi Adapter developed by D-Link has a Brute-Force Protection Bypass vulnerability, allowing unauthenticated adjacent network attackers to bypass login attempt limits to perform brute-force attacks to gain control over the device.

Published 2026-04-24

@node-oauth/oauth2-server is a module for implementing an OAuth2 server in Node.js. The token exchange path accepts RFC7636-invalid code_verifier values (including one-character strings) for S256 PKCE flows. Because short/weak verifiers are accepted and failed verifier attempts do not consume the authorization code, an attacker who intercepts an authorization code can brute-force code_verifier guesses online until token issuance succeeds.

Published 2026-04-23

blueprintUE is a tool to help Unreal Engine developers. Prior to 4.2.0, the login form handler performs no throttling of any kind. Failed authentication attempts are processed at full network speed with no IP-based rate limiting, no per-account attempt counter, no temporary lockout, no progressive delay (Tarpit), and no CAPTCHA challenge. An attacker can submit an unlimited number of credential guesses. The password policy (10+ characters, mixed case, digit, special character) reduces the effective keyspace but does not prevent dictionary attacks, credential stuffing from breached databases, or targeted attacks against known users with predictable passwords. This vulnerability is fixed in 4.2.0.

Published 2026-04-21

The login limit is not enforced on the SFTP service of Fortra's GoAnywhere MFT prior to 7.10.0 if the Web User attempting to be logged in to is configured to log in with an SSH Key, making the SSH key vulnerable to being guessed via Brute Force.

Published 2026-04-21

This vulnerability exists in Quantum Networks router due to missing rate limiting and CAPTCHA protection for failed login attempts in the web-based management interface. An attacker on the same network could exploit this vulnerability by performing brute force attacks against administrative credentials, leading to unauthorized access with root privileges on the targeted device.

Published 2026-04-21

ChurchCRM is an open-source church management system. In versions prior to 7.2.0, the public API login endpoint (/api/public/user/login) returns distinguishable HTTP response codes based on whether a username exists: 404 for non-existent users and 401 for valid users with incorrect passwords. An unauthenticated attacker can exploit this difference to enumerate valid usernames, with no rate limiting or account lockout to impede the process. This issue has been fixed in version 7.2.0.

Published 2026-04-18

Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 8.4 through 8.5 contain an improper restriction of excessive authentication attempts vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Published 2026-04-17

Eaton Intelligent Power Protector (IPP) software allows repeated authentication attempts against the web interface login page due to insufficient rate‑limiting controls. This security issue has been fixed in the latest version of Eaton IPP which is available on the Eaton download centre.

Published 2026-04-16

OpenProject is an open-source project management application. In versions prior to 17.3.0, 2FA OTP verification in the confirm_otp action of the two_factor_authentication module has no rate limiting, lockout mechanism, or failed-attempt tracking. The existing brute_force_block_after_failed_logins setting only counts password login failures and does not apply to the 2FA verification stage, and neither the fail_login nor stage_failure methods increment any counter, lock the account, or add any delay. With the default TOTP drift window of ±60 seconds allowing approximately 5 valid codes at any time, an attacker who knows a user's password can brute-force the 6-digit TOTP code at roughly 5-10 attempts per second with an expected completion time of approximately 11 hours. The same vulnerability

Published 2026-04-15

CWE-307 Improper Restriction of Excessive Authentication Attempts vulnerability exists that would allow an attacker to gain access to the user account by performing an arbitrary number of authentication attempts with different credentials on a sequence of requests to multiple endpoints.

Published 2026-04-14

Rate Limiting for attempting a user login is not being properly enforced, making HCL DevOps Velocity susceptible to brute-force attacks past the unsuccessful login attempt limit. This vulnerability is fixed in 5.1.7.

Published 2026-04-13

Vikunja is an open-source self-hosted task management platform. Prior to 2.3.0, the TOTP failed-attempt lockout mechanism is non-functional due to a database transaction handling bug. When a TOTP validation fails, the login handler in pkg/routes/api/v1/login.go calls HandleFailedTOTPAuth and then unconditionally rolls back. HandleFailedTOTPAuth in pkg/user/totp.go uses an in-memory counter (key-value store) to track failed attempts. When the counter reaches 10, it calls user.SetStatus(s, StatusAccountLocked) on the same database session s. Because the login handler always rolls back after a TOTP failure, the StatusAccountLocked write is undone. The in-memory counter correctly increments past 10, so the lockout code executes on every subsequent attempt, but the database write is rolled back

Published 2026-04-10

OpenClaw before 2026.3.25 contains a pre-authentication rate-limit bypass vulnerability in webhook token validation that allows attackers to brute-force weak webhook secrets. The vulnerability exists because invalid webhook tokens are rejected without throttling repeated authentication attempts, enabling attackers to guess weak tokens through rapid successive requests.

Published 2026-04-09

OpenClaw before 2026.3.25 contains a missing rate limiting vulnerability in Telegram webhook authentication that allows attackers to brute-force weak webhook secrets. The vulnerability enables repeated authentication guesses without throttling, permitting attackers to systematically guess webhook secrets through brute-force attacks.

Published 2026-04-09

OpenClaw before 2026.3.25 contains a missing rate limiting vulnerability in webhook authentication that allows attackers to brute-force weak webhook passwords without throttling. Remote attackers can repeatedly submit incorrect password guesses to the webhook endpoint to compromise authentication and gain unauthorized access.

Published 2026-04-09

OpenClaw before 2026.3.28 contains a missing rate limiting vulnerability in the Nextcloud Talk webhook authentication that allows attackers to brute-force weak shared secrets. Attackers who can reach the webhook endpoint can exploit this to forge inbound webhook events by repeatedly attempting authentication without throttling.

Published 2026-03-31